How to replace swing-out refrigerator water filters
In this video, we show you how to replace a refrigerator water filter that swings out from the housing in the top left wall or inside the refrigerator door.
Remember to replace the water filter every 6 months to keep your refrigerator's ice and water clean and fresh-tasting; replace it more frequently if you notice the water flow slowing.
These instructions work for water filter part numbers RPWFE and XWF. Not sure which filter is right for your refrigerator? Our water filter finder can help.
Hi, this is Wayne from Sears PartsDirect. Today we're going to show you how to replace a refrigerator water filter that you swing out to remove.
Where to find a water filter that you swing out to remove
Swing-out water filters are usually on the inside top left wall of the refrigerator or in the refrigerator door. If it’s in the door, it could be behind a door bin, in a middle compartment or on the end of the refrigerator door. Refer to the owner's manual if you don't find the filter in one of these locations.
How to replace a swing-out water filter in the top left wall
Open the cover and swing the filter out.
Pull the filter straight out of the housing.
Insert the new filter in the housing.
Swing the filter into its compartment and close the cover.
How to replace a swing-out filter in the end of the door
Open the cover and pull out the bottom of the filter.
Pull the filter straight out of the housing.
Insert the new filter in the housing.
Swing the filter into its compartment and close the cover.
How to replace a swing-out filter behind a door bin
Remove the door bin and swing the filter out.
Twist the filter to the left to release it then pull the filter straight out of the housing.
Insert the new filter in the housing and twist it to the right.
Swing the filter into its compartment and reinstall the door bin.
How to replace a swing-out filter in the middle of the door
Open the cover and swing the filter out.
Twist the filter to the left to release it then pull the filter straight out of the housing.
Insert the new filter in the housing and twist it to the right.
Swing the filter into its compartment and close the cover.
Final steps
Run 2 gallons of water through the water dispenser to purge air and residue.
Reset the water filter replacement reminder light on the control.
If you’re having problems removing your old filter or installing the new one, check out our video on replacement tips.
Save yourself the hassle of remembering to order a new water filter regularly by signing up for a subscription plan at SearsPartsDirect.com. You get free shipping and free up space in your memory banks.
You can find more DIY tips in the repair help section of our website. We hope this video helped you out today. Thanks for watching and subscribe to see new videos as soon as we post them.
Repair guides for bottom-mount refrigerators
How to replace a flipper mullion on a French-door refrigerator
If the flipper mullion breaks or its heater quits working, replace it in 15 minutes using these 4 easy steps.…
How to replace a door gasket in a French-door refrigerator
The door gasket, often called a door seal, seals the gap around the door to keep the cold air in and the warm air out. R…
How to replace a refrigerator water valve
Replace the water valve that feeds water to the ice maker and water dispenser if it no longer controls the flow of water…
Articles and videos for bottom-mount refrigerators
No matter what style GE Profile refrigerator you have, we can walk you through replacing the water filter.…
See how to install the water filter on your GE refrigerator, no matter the filter type or refrigerator style.…
No matter what style Maytag refrigerator you have, we can walk you through replacing the water filter.…